Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio privacy kek life-time
77
Cisco IOS Release 12.1(5)XM
radio privacy kek life-time
To configure key encryption key (KEK) life-time data privacy on the wireless network, use the radio
privacy kek life-time interface configuration command. To set to the default value, use the no form of
this command.
radio privacy kek life-time seconds
no radio privacy kek life-time
Syntax Description
Defaults 604,800 seconds
Command Modes Interface configuration
Command History
Examples The following example shows how to set the privacy KEK life-time to 750,000 seconds:
UBR(config-if)# radio privacy kek life-time 750000
Related Commands
seconds Specifies the user-input time in seconds. The default value of 604800
seconds is used if you do not specify the KEK life-time. Valid range is
86,400 to 6,048,000 seconds.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
radio privacy enable Activates radio privacy on the wireless link.
radio privacy
mandatory
Activates radio privacy and disallows access for any unencrypted wireless
subscriber units.
radio privacy kek
grace-time
Sets the radio privacy KEK grace-time.
radio privacy tek
grace-time
Sets the radio privacy TEK grace-time.
radio privacy tek
life-time
Sets the radio privacy TEK life-time. display the traffic encryption key
(TEK) life-time and grace-time values that have been set
show radio privacy
kek
Displays the KEK life-time and grace-time values that have been set.
show radioprivacy tek Displays the TEK life-time and grace-time values that have been set.