Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio privacy mandatory
78
Cisco IOS Release 12.1(5)XM
radio privacy mandatory
To activate radio privacy and disallow access for any unencrypted wireless subscriber units on the
wireless network, use the radio privacy mandatory interface configuration command. Use this
command after setting KEK and TEK. To deactivate radio privacy, use the no form of this command.
radio privacy mandatory
no radio privacy mandatory
Syntax Description This command has no arguments or keywords.
Defaults Deactivated
Command Modes Interface configuration
Command History
Examples The following example shows how to activate radio privacy and disallow access for any unencrypted
wireless subscriber units:
Router(config-if)# radio privacy mandatory
Related Commands
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
radio privacy enable Activates radio privacy on the wireless link.
radio privacy kek
grace-time
Sets the radio privacy KEK grace-time.
radio privacy kek
life-time
Sets the radio privacy KEK life-time.
radio privacy tek
grace-time
Sets the radio privacy TEK grace-time.
radio privacy tek
life-time
Sets the radio privacy TEK life-time.
show radio privacy
kek
Displays the KEK life-time and grace-time values that have been set.
show radioprivacy tek Displays the TEK life-time and grace-time values that have been set.