Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
Feature Overview
4
Cisco IOS Release 12.1(5)XM
The power feed panel consists of the following components:
• Coaxial cable connection ports to the wireless modem card on the front panel
• Power ON/OFF switches on the front panel, with LED power indicators
• Coaxial cable connection ports to the wireless transverter on the rear panel, with LED power
indicators
• DC power supply terminal blocks on the rear panel
At least one power feed panel is required for each installation. Each power feed panel supports a
maximum of four wireless transverters.
For further information regarding the power feed panel, including detailed installation information,
refer to the Cisco uBR7200 Series Router Multipoint Wireless Modem Card and Subsystem Installation
document.
Wireless Transverter
The ruggedized wireless transverter is the outdoor data interface to the indoor subsystems. It provides
up/down conversion from IF to RF frequencies.
The wireless transverter consists of the following components:
• RF head
• Connector port for IF input, power, and control signal
• Duplexer assembly with antenna connection
For further information regarding the wireless transverter, including detailed installation information,
refer to the Cisco uBR7200 Series Router Multipoint Wireless Modem Card and Subsystem Installation
document.
Benefits
The broadband fixed wireless multipoint system provides:
• Fast, easy deployment
• Flexibility—Various interfaces to the host routers and numerous network deployment plans
• End-to-end Cisco IOS network, enabling multiservice security, multimedia, and management
support
• Scalable network growth through the addition of more cells or sectors
• Full-duplex data rates of up to 22 Mbps
• Non-line-of-sight (Non-LOS) Vector Orthogonal Frequency Division Multiplexing (VOFDM)
technology, enabling greater service coverage
Related Features and Technologies
The point-to-point wireless router system.