Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio upstream subchannel
110
Cisco IOS Release 12.1(5)XM
radio upstream subchannel
To create a radio upstream in a subchannel configuration to use a specific modulation profile, use the
radio upstream subchannel interface configurtion command. To disable this function, use the no form
of this command.
radio upstream n subchannel sc modulation-profile p
no radio upstream subchannel sc modulation-profile p
Syntax Description
Defaults No default behavior or values.
Command Modes Interface configuration
Command History
n User-specified logical index number. Valid range is 1 to 255.
sc Specifies the subchannel assignment. Valid range is 1 to 7.
p Specifies the modulation profile to use. Valid range is 1 to 32. The
modulation profiles are created with the radio modulation-profile
command.
Note The width specified by the radio modulation-profile command
must match the width of the subchannel to which this upstream is
assigned. Also, note that the upstream must not overlap spectra with
any other existing upstreams (for example, upstream 1 and
upstream 4 should not be created because their spectra overlap).
modulation-profile Creates modulation profiles for upstream and downstream channels.
Release Modification
12.1(3)XQ1 This command was introduced.