Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio downstream subchannel modulation-profile
43
Cisco IOS Release 12.1(5)XM
radio downstream subchannel modulation-profile
To create a radio downstream in a subchannel configuration to use a specific modulation profile, use the
radio downstream subchannel modulation-profile interface configuration command. To disable the
specified modulation profile, use the no form of this command.
radio downstream subchannel sc modulation-profile p
no radio downstream subchannel sc modulation-profile p
Syntax Description
Defaults No default behavior or values.
Command Modes Interface configuration
Command History
Usage Guidelines The sc field corresponds to the following subchannel numbering scheme. The center frequency and the
width for the downstream is inferred from this subchannel assignment.
sc Identifies the subchannel number. Valid values are 1 to 7.
p Profile index defined by the radio modulation-profile command. Valid
values are 1 to 32.
Note The width specified by the radio modulation-profile command
must match the width of the subchannel where the downstream is
being assigned.
Release Modification
12.1(3)XQ1 This command was introduced.
1
one "channel"
35543
23
45 67