Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio self-test
90
Cisco IOS Release 12.1(5)XM
radio self-test
To test the memory and hardware integrity of the wireless modem card, use the radio self-test interface
configuration command. To configure a link without a self-test, use the no form of this command.
radio self-test
no radio self-test
Syntax Description
Defaults Self-test is disabled by default.
Command Modes Interface configuration
Command History
Usage Guidelines Self-test is executed when microcodes are loaded in each of the field-programmable gate arrays
(FPGAs) and digital signal processes (DSPs) when the router loads, or after a microcode reload
command is executed. Self-test is not executed on each no shut command.
Examples The following example shows how to download and execute self-tests each time the modem card is
enabled:
UBR04(config-if)# radio self-test
Related Commands
enable (Optional) Causes execution of self-tests each time the card is initiated.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
show running-configuration
interface radio
Displays the current settings.