Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show controllers radio rf
118
Cisco IOS Release 12.1(5)XM
show controllers radio rf
To display the RF hardware information for the specified radio interface, use the show controllers
radio rf EXEC command. To disable this function, use the no form of this command.
show controllers slot/port radio rf
no show controllers slot/port radio rf
Syntax Description
Defaults No default behaviors or values.
Command Modes EXEC
Command History
Usage Guidelines The following RF information is displayed:
• The RF board identification and capability information obtained from the RF board's EEPROM or
NVS.
• The RF board control (ctrl reg) information.
• Alarm status information.
slot/port Specifies the slot and port numbers for the specified radio interface.
Release Modification
12.1(3)XQ1 This command was introduced.