Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
radio upstream rate-limit
108
Cisco IOS Release 12.1(5)XM
radio upstream rate-limit
To set the upstream rate limiting for an upstream port on an upstream channel, use the radio upstream
rate-limit interface configuration command. To disable the upstream rate limiting, use the no form of
this command.
radio upstream portnum rate-limit [token-bucket [shaping]]
no radio upstream portnum rate-limit
Syntax Description
Defaults The rate-limit token-bucket is the default setting.
Command Modes Interface configuration
Command History
Examples The following example shows how to use the token bucket filter algorithm for upstream port 4:
Router(config-if)# radio upstream 4 rate-limit token-bucket
Related Commands
portnum Specifies the upstream port number. Valid values are 0 to 3.
token-bucket This optional keyword applies the token bucket algorithm.
shaping This optional keyword applies the token bucket policing with grant shaping.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
radio downstream
rate-limit
Controls downstream rate limiting.