Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show radio qos profile
157
Cisco IOS Release 12.1(5)XM
show radio qos profile
To verify whether a quality-of-service (QoS) profile has been created, and to see how it has been
configured, use the show radio qos profile EXEC command.
show radio qos profile [number verbose]
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Command History
Usage Guidelines If you have difficulty, check the following:
• Make sure that you are in EXEC mode.
• Make sure that you typed the correct QoS profile number and profile elements when you used the
command.
• Subscriber units that register continuously and fail consume more resources than subscriber units
that stay registered. For customers who do not pay for service, assign QoS profile 3.
Examples The following example shows how to display a QoS profile table:
CMTS01# show radio qos profile
Service Prio Max Guarantee Max Max tx TOS TOS Create B
class upstream upstream downstream burst mask value by priv
bandwidth bandwidth bandwidth enab
1 0 0 0 0 0 0x0 0x0 cmts no
2 0 64000 0 1000000 0 0x0 0x0 cmts no
3 0 1000 0 1000 0 0x0 0x0 cmts no
4 7 2000000 100000 4000000 0 0x0 0x0 cm yes
Related Commands
number Specifies the class index number. Valid range is 1 to 255.
verbose Displays detailed information on the QoS profile.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
radio qos profile Configures the QoS profile.