Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show interfaces radio metrics
121
Cisco IOS Release 12.1(5)XM
show interfaces radio metrics
To display the parameters measured during the operation of the radio link, use one of the following
show interfaces radio metrics privileged EXEC command. These metrics provide a quantitative
measure of how well the per- subscriber link or per-channel link is performing over time.
Metrics that quantify per-subscriber performance:
show interfaces radio slot/port metrics-su MAC-address
show interfaces radio slot/port metrics-bad-su
show interfaces radio slot/port metrics-threshold-su
Metrics that quantify per-channel performance:
show interfaces radio slot/port metrics-threshold-channel channel
show interfaces radio slot/port 1sec-metrics-channel channel
show interfaces radio slot/port 1min-metrics-channel channel
show interfaces radio slot/port 1hour-metrics-channel channel
Syntax Description
Defaults No default behaviors or values.
Command Modes EXEC
Command History
slot/port Specifies the slot and port numbers of the wireless modem card.
MAC-address Specifies the valid MAC address.
metrics-bad-su Displays the list of subscriber units (SUs) that crossed the specified
threshold.
metrics-su Displays the cumulative SU metrics for the last 1 hour.
metrics-threshold-su Displays metrics thresholds for the SU.
metrics-threshold-channel Displays metrics thresholds for the channel.
channel Specifies the channel number. Valid numbers are 0 to 3.
1sec-metrics-channel Displays the cumulative channel metrics for the last 1 second.
1min-metrics-channel Displays the cumulative channel metrics for the last 1 minute.
1hour-metrics-channel Displays the cumulative channel metrics for the last 1 hour.
Release Modification
12.1(3)XQ1 This command was introduced.