Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
Command Reference
18
Cisco IOS Release 12.1(5)XM
• radio self-test
• radio source-verify
• radio transmit-power
• radio upstream data-backoff
• radio upstream description
• radio upstream frequency
• radio upstream range-backoff
• radio upstream shutdown
• radio upstream subchannel
• radio upstream target-receive-power
Verification Commands
Use the following commands to verify your installation and configuration of the fixed wireless
multipoint headend system:
• show controllers radio downstream
• show controllers radio if
• show controllers radio rf
• show controllers radio upstream
• show interface radio alc
• show interface radio downstream
• show interface radio ranging
• show interface radio upstream
• show radio capability modulation-profile
• show radio modulation-profile
Operating Commands
After you have installed, configured, and verified your fixed wireless multipoint headend system, use
the following commands to operate your system:
• clear radio flap-list
• clear radio link-metrics
• clear radio subscriber counters
• clear radio subscriber reset
• pppoe enable
• pppoe-forwarding
• pppoe forwarding default-qos-level
• pppoe forwarding group
• pppoe su-mac
• pppoe tag