Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
show interface radio zero-burst
144
Cisco IOS Release 12.1(5)XM
show interface radio zero-burst
To display zero-burst information for the downstream port of a wireless modem card, use the show
interface radio zero-burst EXEC command.
show interface radio slot/port zero-burst
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Command History
Examples The following example shows how to display zero-burst information for the radio card located in slot
5, port 0:
uBR7200# show interface radio 5/0 zero-burst
Zero Burst:
Ambient SID = 1c5c Interval = 720 min.
Calibration SID = 1c5d Interval = 360 min.
slot/port Specifies the slot and downstream port numbers of a wireless modem card.
Release Modification
12.1(3)XQ1 This command was introduced.