Filter
Top Products
Multipoint Wireless Support for the Cisco uBR7200 Series Universal Broadband Router
clear radio subscriber counters
23
Cisco IOS Release 12.1(5)XM
clear radio subscriber counters
To clear the counters for a radio modem or all radio modems in the Station Maintenance List, use the
clear radio subscriber counters EXEC command.
clear radio subscriber [address | all] counters
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Command History
Usage Guidelines Make sure that you record and analyze the data before executing this command.
Examples The following example shows how to clear the flapping counters for all the subscribers that are on the
network:
Router# clear radio subscriber all counter
Related Commands
address Clears the counters in the Station Maintenance List for the subscriber unit
with a specific IP address or MAC address.
all Clears the counters in the Station Maintenace List for all subscriber units.
Release Modification
12.1(3)XQ1 This command was introduced.
Command Description
clear radio subscriber
reset
Removes subscribers from the Station Maintenance List.
show radio subscriber Displays information about a wireless modem card that is on the network.