Filter
Top Products
Configuration Extensions
372 SPU 780 01EMAN May 2002 117
Editing Specific
Inputs
Select the Specific Input icon in the Links panel, then:
Editing Specific
Outputs
Select the Specific Output icon in the Links panel, then:
Step Action
1 Select a specific input from the Specific Input list by double-clicking on an input.
The specific input properties grid appears.
2 In the Start field, enter the starting address of the block of data to be placed from
the source controller.
3 Enter the number of words (1 to 32) to be received from the source controller in
the Length field.
4 Select either BIN (default) or BCD from the Type drop-down field.
Step Action
1 Select a specific output from the Specific Output list by double-clicking on an
output. The specific output properties grid appears.
2 In the Start field, enter the starting address for the block of data to be sent to the
destination controller.
3 Enter the number of words (1 to 32) to be sent to the destination controller in the
Length field.
4 Select either BIN (default) or BCD from the Type drop-down field.