Filter
Top Products
Using the Data Watch Window
372 SPU 780 01EMAN May 2002 203
Adjusting the
Setpoint Value
In the PID Summary Window:
Jumping to the
Currently
Selected PID
Block in the
Logic Editor
In the PID Summary Window:
Editing PID Data In the PID Summary Window:
Trending PID
Data
In the PID Summary Window:
Step Action
1 Click the Adjust button.
2 Click and drag the slider up to increase the setpoint and down to decrease the
setpoint.
Step Action
1 Select the row of the PID or PID2 instruction that you want to jump to.
2 Click the Goto button. (The Logic Editor is activated and the cursor is positioned
on the selected PID block.)
Step Action
1 Select the row of the PID or PID2 you want to edit
2 Click the Tune button. The Instruction Editor is activated containing the selected
PID or PID2 instruction. Here you may edit all data values related to the
instruction.
3 Click PID Summary tab to exit the Instruction window.
Step Action
1 Select the row of the PID or PID2 you want to trend.
2 Click the Trend button. The Trend Window is activated showing the trend data
of the selected PID or PID2.
3 Click PID Summary tab to exit the Instruction window.