Filter
Top Products
Using the Data Watch Window
178
372 SPU 780 01EMAN May 2002
Filling the Data
Watch Window
with Addresses
From the right-click menu:
Setting the Radix
for Multiple
Addresses
In the data watch window:
Deleting
Addresses
In the data watch window:
Step Action Result
1 Select Fill Addresses. The Add Addresses dialog appears
within the Data Watch Window.
2 Enter an address in the Starting
Address box.
This is the first in a range of addresses
to be added to the Data Watch Window.
3 Enter a numeric value (1 through 100)
in the Number of Addresses box.
This is the length of the range of
addresses to be added to the Data
Watch window.
4 Click OK. Addresses specified are added at the
current grid location. Existing addresses
may be overwritten.
Step Action Result
1 Select the radices you want to change.
2 From the right-click menu, select Set
Radix.
The Set Radices dialog appears within
the Data Watch Window.
3 Select a radix from the Radix drop-down list box.
4 Click OK. All selected radices are updated to the
specified radix.
Step Action Result
1 Select the addresses you want to delete.
2 From the right-click menu, select
Delete Addresses.
Selected addresses are deleted.
3 Or, Select an address and press
DELETE.
Selected address is deleted.