Filter
Top Products
Using the Data Watch Window
204
372 SPU 780 01EMAN May 2002
Setting the PID
Contact
In the PID Summary Window:
Step Action
1 Click the Force Input Contact check box.
Note: This overrides the contact setting by disabling the contact. Ensure that this
does not result in any safety issues.
2 The default contact setting is Auto. To toggle the contact click the Auto/Manual
button. The label on the button specifies the current state of the contact. Auto =
ON, Manual = OFF. Adjusting this disables the contact immediately in front of the
top node of this PID instruction and forces it ON or OFF.