Filter
Top Products
ProWORX 32 Utilities
224
372 SPU 780 01EMAN May 2002
Automatically
Checking IP
Addresses
In the BootP Server utility:
Using the Device
List
In the BootP Server utility:
Step Action
1 Click Enable Active Device Ping. This periodically pings each IP address in the
list. The status of the device located at the address is reported back in the Status
field.
Tip: Use Enable Active Device Ping when performing automatic BootP
operations. Once a BootP operation is complete, the success of the operation is
updated in the Status column in the list.
Step Action
1 To add a device to the BootP list, click New Device.
2 To remove a device from the BootP lists, select a device from the list and click
Delete Device.
3 To configure a device in the BootP list, select a device from the list and enter the
parameters into the available Device Info and Optional Parameters fields. For
parameter descriptions, see ‘Device Parameters’.
4 To have the ability to write the Gateway address and the Subnet mask to the
device, select the Write Optional Parameters check box, otherwise these
parameters are unavailable.