Filter
Top Products
ProWORX 32 Reporting
234
372 SPU 780 01EMAN May 2002
Quick Picks Quick picks are pre-defined sets of reporting options. Select an option in the quick
pick list box to get a pre-selected list of options for reporting. Choose an option in
the list box and the respective report options will be automatically selected.
The options are as follows:
Using the
Reporting Setup
After opening the reporting setup dialog (Step 3 in ‘Using the printing menu’):
Quick Pick Description
Turn off all options All report options are deselected.
Turn on all options All report options are selected.
All networks All settings within the Networks report option are selected.
Everything but networks All settings within all report options are selected except the
Networks report option.
All documentation tables All settings within the Descriptor Ranges option and
Documentation Tables options are selected.
All controller tables All settings within the Configuration Tables, Traffic Cop,
Register Content Ranges, and Used Tables report options are
selected.
All used tables All settings within the Used Tables report option are selected.
All mismatch tables All settings within the Mismatch Tables report option are
selected.
Step Action
1 Select the report options that you want to include in the report, from Networks,
Descriptor ranges, Documentation tables, Configuration tables, Traffic cop,
Register content ranges, Used tables, and Mismatch tables, by clicking the
corresponding check box.
2 Set the parameters within each report option that you have selected. (To see
further details pertaining to each report option, see below.)
3 To select all parameters, or deselect all parameters within a report option, click
Toggle All.
4 To save the current report options, click Save Settings.
5 To preview the report as it will be printed, click Print Preview.
6 When you are finished setting the report options, click Close.