Filter
Top Products
Schneider Alliances
372 SPU 780 01EMAN May 2002 247
Using the MCS
Simple 2 Editor
After clicking the ellipsis box in the MCS Simple 2 parameter:
Using the Default
Parameter Data
Editor
After clicking the ellipsis box in the Default Parameter Data parameter, the Data
Values dialog opens, showing the current number of rows in the Number of
Parameters Used parameter, and the current value in the Default Parameter Data
parameter. To edit the contents of a row, simply double-click the cell you want to
edit, and enter a Hex value. Use the following functions to further edit the parameter:
I/O Card
Parameters
Parameters list:
Step Action
1 Double-click the ’1’ or ’0’ to toggle a bit.
2 Click the Save button to save changes back to the main grid, or click Cancel to
return the main grid without updating any changes.
Function Action Comment
1 Click Add. A blank cell is added to the end of the
grid.
2 Click Remove. The currently selected row is deleted,
and the cells below are shuffled up.
3 Click Move Up. The contents of the currently selected
cell are moved up one cell.
4 Click Move Down. The contents of the currently selected
cell are moved down one cell.
Parameter Description
Card ID Hex Value. The Unique Modicon ID for each card of an I/O series.
INTERBUS ID Hex Value. The INTERBUS S ID of a card.
Drop Allowed Momentum Only. Defines whether or not a Momentum CPU supports a
non-local, INTERBUS S drop.
Card Description Description of the currently selected I/O card. This is used throughout
ProWORX 32 to pick, edit, and add I/O cards. Maximum ten characters.
Medium
Description
Text description displayed in the Traffic Cop when editing slot properties
of a card.
Long Description A more detailed description of the card.
Power The amount of power used by the card in the rack.
Power (+5) Number of mA used by card at this power rating.
Power (+4.3) Number of mA used by card at this power rating.
Power (-5) Number of mA used by card at this power rating.