Filter
Top Products
Performance Verification
4-8
AWG710 Service Manual
The tests in this section produce an extensive, valid confirmation of performance
and functionality when the following requirements are met:
H The cabinet must be installed on the instrument.
H You must have performed and passed the procedures under Self Tests, found
on page 4–3.
H The waveform generator must have been recently adjusted at an ambient
temperature between +20_ C and +30_ C, must have been operating for a
warm-up period of at least 20 minutes, and must be operating at an ambient
temperature between +10_ C and +40_ C.
Refer to Conventions on page 4–2 for more information.
These procedures use external, traceable signal sources to directly check
warranted characteristics. Table 4–2 lists the equipment required to complete the
performance tests.
Table 4-2: Test equipment
Item number and
description
Minimum requirements Example (recommended) Purpose
1. Frequency Counter 1 MHz to 100 MHz,
Accuracy: t 0.2 ppm
Anritsu MF1603A Checks reference input.
2. Digital multi meter DC volts range: 0.05 V to 10 V,
Accuracy: "0.1 %
Fluke 8842A Measures voltage. Used in
multiple procedures.
3. Oscilloscope
Bandwidth: u 500 MHz, 1 MW and
50 W inputs
Tektronix 784D Checks output signals. Used
in multiple procedures.
4. Oscilloscope
Bandwidth: u 6 GHz,
Rise time: t 58.3 ps, 50 W input
Tektronix TDS820 Checks direct DA rise time
and normal out pulse reĆ
sponse.
5. Function Generator Output voltage: -5 V to +5 V,
Frequency accuracy: t 0.01 %
Tektronix AFG310 Generates external input
signals. Used in multiple input
signal test procedures.
6. SMA Coaxial Cable
(2 required)
50 W, male to male SMA connectors Tektronix part number
174Ć1427Ć00
Signal interconnection
7. BNC Coaxial Cable
(3 required)
50 W, male to male BNC connectors Tektronix part number
012Ć0482Ć00
Signal interconnection
8. Adapter
(2 required)
SMA (male) to BNC (female), 50 W Tektronix part number
015Ć0554Ć00
Signal interconnection
9. Adapter SMA (female) to BNC (male), 50 W Tektronix part number
015Ć0572Ć00
Signal interconnection
Prerequisites
Equipment Required