Filter
Top Products
Operating Basics
2-30
AWG710 Service Manual
NOTE. In the following procedures, you may have to push the EDIT button twice
to exit the editor. When the instrument does not display the file list, push the
EDIT button again. If you are prompted, refer to Saving Files on page 2–33.
You can copy files in from a double window or a single window. In a double
window, push the Copy button to copy the selected file in the active window into
the desired window.
Copying files in double windows. Do the following steps to copy files selected in
the active window:
1. Push EDIT (front) button and select the file to copy.
2. Push Window (bottom)!Window (side) to select Double.
Two file windows are displayed.
3. Push Select (side) to select the active window.
4. Push Directory (bottom)!Up Level, Down Level, or Make Directory
(side) to select the destination.
5. Push Select (side) to activate the window into which you are going to copy
the file and then select the file.
6. Push File (bottom)!Copy (side) to copy the file to the destination as the
same file name.
If the directory name is the same as the destination directory name, you will
be asked to confirm to overwrite the file.
Copying files in single window. Do the following steps to copy files selected in
single window:
1. Push EDIT (front) button and select the file to copy.
2. Push File (bottom)!Copy (side) and select the file name and destination.
3. Push OK (side) to copy the file.
The file is copied and renamed.
NOTE. For additional file copying and file moving procedures, refer to Double
Windows on page 2–36.
Copying Files