Filter
Top Products
Operating Basics
2-40
AWG710 Service Manual
Setup Overview
The Setup screen is where you load and set up the waveform for output. This
section gives you an overview of the Setup screen, how to load a file, how to set
the signal output parameters, and how to enable signal output. Refer to The Setup
Menu Screen in the Reference section of User manual for more information.
Push the SETUP front panel button to display the main Setup screen. See
Figure 2–23. Table 2–13 describes the screen waveform parameter icons. Table
2–14 lists the bottom menu functions.
Clock frequency
Run mode
Instrument status
Bottom menu
Side
menu
area
Waveform
parameter icons
Number of points for
loaded waveform
.
Figure 2-23: Main Setup screen (small figure: option 02)
Main Setup Screen