Filter
Top Products
Removal and Installation Procedures
AWG710 Service Manual
6-11
Table 6-4: Tools required for module removal (Cont.)
Item no. DescriptionName
14 Adhesive TRAĆCON: TraĆBond #BAĆ2114
15 Wrench, 5/16 inch Srandard tool
Throughout this manual, certain procedures refer to various instrument orienta-
tion, such as front, right, bottom, and top. See Figure 6–1 for an illustration of
how each side is specifically referenced.
Figure 6-1: Instrument orientation
Instrument Orientation