Filter
Top Products
Operating Basics
AWG710 Service Manual
2-25
Character palette
Text field
Name list
Text field
Character palette
Text field
Caret
Figure 2-14: Three type of Input text dialog boxes
Verify that the character palette is highlighted and that the general purpose knob
is displayed. You cannot select characters if the character palette is not high-
lighted. Use the y and b arrow buttons to highlight the character palette, if
necessary.
Do the following steps to input the file name:
1. Push the y and b arrow buttons to move the caret in the text field.
2. Use the general purpose knob to select the character.
3. Push the ENTER button or
button to insert the selected character at the
caret position.
Repeat step 1 through step 3 to input the file name.
The current directory file list is displayed in the character palette field. By
default, the file is stored in the current directory. If you want to store the file in
another directory, use the general purpose knob to move to another directory. If
you want to store the file in another drive, push DRIVE... (side) to change the
drive. You can select the Up Level, Down Level (side) to move to another
directory.
File Name Input