Tektronix 070-A830-51 Welding System User Manual


 
Specifications
AWG710 Service Manual
1-5
Table 1-4: Clock generator
Characteristics Description PV reference page
Sampling frequency 50 kHz to 4 GHz
Resolution 8 digits
Internal clock
1
n Frequency accuracy
"1 ppm (10_ Cto40_ C) (50_ F to 104_ F) , for one year after
calibration
Page 4-48
Phase noise at 1/4 clock output,
Typical
(Data Clock is 1/4th of the output sample rate)
-80 dBc / Hz (1 GHz with 10 kHz offset)
-100 dBc/Hz (1 GHz with 100 kHz offset)
1
The internal reference oscillator is used.
Table 1-5: Internal trigger generator
Characteristics Description PV reference page
Internal trigger rate
2
Accuracy
"0.1%
Range 1.0 ms to 10.0 s
Resolution 3 digits, minimum 0.1 ms
2
The internal reference oscillator is used.
Table 1-6: Main output
Characteristics
3
Description PV reference page
Output connector Front panel SMA connectors
Output signal Complementary; CH1 and CH1
DA converter
Resolution 8 bits
Differential nonlinearity
Within "1/2 LSB
Integral nonlinearity
Within "1LSB
Output impedance 50 W
Normal out (except option 02)
Output voltage -1.5 V to +1.5 V, into a 50 W load
Amplitude
Range 20 mV
pkĆpk
to2V
pkĆpk
,intoa50W load
Resolution 1mV
n DC accuracy
"(2.0% of amplitude + 2 mV), offset: 0 V
Page 4-22
Offset
Range -0.5 V to 0.5 V, into a 50 W load