Filter
Top Products
Operating Basics
AWG710 Service Manual
2-43
buffer are completely independent. So, you can edit a waveform, pattern,
sequence or equation/text while outputting an another waveform or sequence.
However, when you push SETUP (front panel)!Waveform/Sequence
(bottom)!Edit (side) to copy the waveform in the waveform memory to the edit
buffer, you must save the currently edited waveform, pattern, sequence or
equation/text into a file.
You can enter the QUICK EDIT mode only from the waveform editor. When you
enter the QUICK EDIT mode, the instrument copies the data from the edit buffer
to the undo buffer. All the changes you make immediately reflect the data in the
edit buffer and the data in the waveform memory if that data is being loaded to
output.
Before loading, you can view a waveform or pattern. Refer to Quick View for
more detail.
To view the loaded waveform file, push the View side menu button. The
instrument opens a window on the screen that displays the waveform, as shown
in Figure 2–25. Push the OK side menu button or front panel ENTER button
to close the view window.
Figure 2-25: Viewing a file in the setup screen
Viewing a Waveform