Filter
Top Products
Operating Basics
AWG710 Service Manual
2-27
Table 2-6: Text input button functions (cont.)
Control Description
CLR button Clears the entire text field.
Numeric buttons Enters numeric characters into the text field.
SHIFT button Enters a selected character in upper case. When you push the
SHIFT button, the SHIFT LED lights. When the dialog box
disappears, the SHIFT LED light turns off.
Shortcut Controls
Figure 2–16 shows the shortcut buttons and knobs that control specific instru-
ment setup parameters. Using the shortcut controls lets you adjust the output
setup parameters even while you are displaying another menu. Table 2–7
describes the shortcut controls.
Figure 2-16: Shortcut controls
Table 2-7: Shortcut controls
Controls Description
VERTICAL
Displays the Vertical side menu. This is the same operation as
selecting SETUP (front)!Vertical (bottom).
Adjusts the vertical offset parameters. This is the same as selecting
SETUP (front)!Vertical (bottom)!Offset (side), and then turning the
general purpose knob. (except option 02)
Adjusts the amplitude parameters. This is the same as selecting
SETUP (front)!Vertical (bottom)!Amplitude (side) and then turning
the general purpose knob.