Filter
Top Products
Platform Clear and Show Commands
3-104 Configuring the XSR Platform
Syntax
show logging
Mode
EXECorPrivilegedEXEC:XSR> or XSR#
Example
XSR>show logging file
Sample Output
Thefollowingexampledisplaystheloggingfileinformation:
XSR#show logging file
History of logging to file cflash:loggen
File logging disabled
File cflash:loggen does not exist.
show logging history
Thiscommanddisplaysthecontentsofthelogginghistorybuffer.
Mode
PrivilegedEXEC:XSR#
Example
XSR#show logging history
Sample Output
Thefollowingcommanddisplayslogginghistoryandseveritylevels:
Log history buffer: logging severity=MEDIUM+HIGH; messages logged= 8
<186>Feb 4 09:12:28 192.168.27.38 CLI: User: admin logged in from console
<186>Feb 4 09:10:56 192.168.27.38 CLI: CLI config mode released by startup-config
<186>Feb 4 09:10:56 192.168.27.38 ETH: Interface FastEthernet1, changed state to up
<186>Feb 4 09:10:56 192.168.27.38 CLI: CLI config mode locked by startup-config
<186>Feb 4 09:10:53 192.168.27.38 PLATF: System warm boot from cli
<11>May 29 22:20:59 TORONTO : System restarted
<12>May 29 22:25:59 TORONTO : Serial 0 changed state from up to down
show sntp
ThiscommanddisplaysSNTP(SimpleNetworkTimeProtocol)setupandtrafficstatistics.
Syntax
show sntp