Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

ISDN Commands

Book Title goes here 11-91

Examples

Thefollowingexampleconfigurestwodatastreamsonleased‐lineBRIinterface1/1at56kbps

withPPPencapsulation:

XSR(config)#interface bri 1/1

XSR(config-if<BRI-1/1>)#leased-line 56

XSR(config)#interface bri 1/1:1

XSR(config-if<BRI-1/1:1>)#ip address 1.1.1.2 255.255.255.0

XSR(config-if<BRI-1/1:1>)#encapsulation ppp

ThefollowingexampleconfiguresBRIB‐channel2:

XSR(config)#interface bri 1/1:2

XSR(config-if<BRI-1/1:2>)#ip address 1.1.1.3 255.255.255.0

XSR(config-if<BRI-1/1:2>)#encapsulation frame-relay

Thefollowingexampleconfiguresonedatastreamonleased‐lineBRIinterface1/1at112kbps

withFrameRelayencapsulation:

XSR(config)#interface bri 1/1

XSR(config-if<BRI-1/1>)#leased-line 112

XSR(config)#interface bri 0/1/2:1

XSR(config-if<BRI-1/2:1>)#ip address 1.1.1.3 255.255.255.0

XSR(config-if<BRI-1/2:1>)#encapsulation frame-relay

pri-group

ThiscommandconfiguresaT1/E1porttoISDNPRIonachannelizedE1/T1card.All23T1or30

E1timeslotsareassignedtoISDNcontrol.

Syntax

pri-group

Syntax of the “no” Form

ThenoformofthiscommandderegisterstheT1/E1controllerfromtheISDNcontroller.Usetheno

formtoremovetheISDNPRIandrestoretheT1/E1controllertoitsdefaultmode:

no pri-group

Mode

Controllerconfiguration:XSR(config-controller<T/Exx>)#

Example

ThefollowingNFASexampleconfiguresPRIwithD‐channelbackup:

XSR(config)#controller t1 1/0

XSR(config-controller<T1-1/0>)#pri-group

previous next