Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

DOD/BOD Commands

XSR CLI Reference Guide 10-101

Example

ThefollowingexampleconfiguresanexthopIPaddress,SPC,hostnameandlinespeedformap

classAcmeMap:

XSR(config)#dialer map 1

XSR(config-if<D1>)#dialer map ip 192.168.57.9 class AcmeMap name AcmeHost spc

speed 56 12345:6789

dialer persistent

Thiscommandbringsupapermanentswitchedconnectionintheabsenceofaninterestingpacket

orprimary‐line‐downbackupdialtrigger.

Syntax

dialer persistent [delay n]

Syntax of the “no” Form

Thenoformofthiscommanddeletesthepersistentsetting:

no dialer persistent

Mode

DialerInterfaceconfiguration:XSR(config-if<Dx>)#

Default

‐1second

Example

ThefollowingexampleconfiguresDialerinterface57tobepersistentfortwominutes:

XSR(config)#interface dialer 57

XSR(config-if<D57>)#dialer persistent 120

dialer redialer attempts

Thiscommandsetstheredialtriggerafterfaileddialattempts.Withaninfinitenumberof

specifiedredialattempts,itispossibletophysicallyconnectamodematanytimeaftersettingthe

dialtriggerandstillmakeaconnection.Also,ifmoreresources(interfaces)areavailableinthe

dialerpool,the

dialerisfreetoredialallmembersofthepool.

Syntax

dialer redial attempts n interval m re-enable t [forever]

n Interval that the dial-out process is delayed after the Dialer interface boots up,

ranging from 1 to 2147483 seconds.

attempts Redial attempts.

previous next