Filter
Top Products
snmp-server Commands
XSR CLI Reference Guide 1-29
snmp-server trap-timeout
Thiscommandspecifiestheintervaltrapsintheretransmissionqueueareretriedifnorouteexists
tothehostthatSNMPtrapswilltobesentto.
Syntax
snmp-server trap-timeout timeout
Syntax of the “no” Form
Thenoformofthiscommandsetsthetrap‐timeouttothedefaultvalue:
no snmp-server trap-timeout
Mode
Globalconfiguration:XSR(config)#
Default
30seconds
snmp-server user
ThiscommandconfigureslocalorremoteusersinanSNMPgroupwithsecuritymodels,
authentication,passwords,privacysettings,andACLs,andaddinguserstotheUSMusertable.
Syntax
snmp-server user username [groupname remote ip-address [udp-port port]{v1 | v2c |
v3 [encrypted][auth {md5 | sha} auth-password [priv des56 priv-password]]}[access
access-list]
timeout
Retryintervalrangingfrom1to9,999seconds.
Note: Be aware that the engineID of the remote SNMP entity must be configured before you add a
user since passwords are hashed with the engineID to create a localized key.
username
Nameoftheuser.
groupname
Nameofthegrouptowhichtheuserbelongs.
remote
AremoteSNMPentity.
ip-address
IPaddressoftheremoteSNMPentity.
udp-port
UDPportoftheremoteSNMPentity.
port
UDPportnumberoftheremoteSNMPentity.Default:162.
v1
v1securitymodel(leastsecure)used.
v2c
v2csecuritymodel(nexttoleastsecure)used.
v3
v3securitymodel(mostsecure)used.
encrypted
SpecifiespasswordsasMD5orSHAdigests.
auth
Authenticationparametersfortheuser.
md5
HMACMD5algorithmusedforauthentication.