Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

File System Commands

3-110 Configuring the XSR Platform

Configuration Load

Thisexampleloadsstartup‐configviathenetworkfromaTFTPserver.TheXSRdoesnotloadthe

configurationfromthenetworkautomatically.

XSR#copy tftp:TFTP1/tftpfiles/tftpimage flash:startup-config

Save Running Configuration

Tosaveconfigurationchangesintonon‐volatilememory,therunningconfigurationmustbe

copiedintostartupconfiguration:

XSR#copy running-config startup-config

copy running-config startup-config

Thiscommandcopiestherunningconfigurationtothestartupconfigurationfilewhichisstoredin

non‐volatilememory.Itinitiatesascriptrequiringconfirmationofyourintention.

Syntax

copy running-config startup-config

Mode

PrivilegedEXEC:XSR#

Example

XSR#copy running-config startup-config

Sample Output

XSR#copy running-config startup-config

Copy 'running-config'

as 'startup-config' into flash: device (y/n) ? y

Running-config saved to startup-config.

<186>Sep 23 16:02:08 10.10.10.20 CLI: Running-config saved to startup-config by

user admin

copy startup-config tftp

ThiscommandsavesthestartupconfigurationonaTFTPserverviathenetworkconnection.It

initiatesascriptrequiringconfirmationofyourintention.

Syntax

copy startup-config tftp:[[[//location]/directory]/filename]

location

IPaddressoftheTFTPserveronthenetwork.

directory

NameoftheTFTPdirectory.

filename

NameoftheTFTPfile.

previous next