Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

OSPF Commands

XSR CLI Reference Guide 5-97

Mode

Interfaceconfiguration:XSR(config-if<xx>#

Example

ThefollowingexampleimposesOSPFpassiveonFastEthernetinterface1:

XSR(config)#interface fastethernet 1

XSR(config-if<F1>)#ip ospf passive

ip ospf poll-interval

ThiscommandsetstheOSPFpollingintervalonMultipointandPoint‐to‐Pointinterfaces.The

defaultvalueallowstheadjacencytobeestablishedperthedefaultHellointerval.

Syntax

ip ospf poll-interval <interval>

Syntax of the “no” Form

Thenoformofthiscommandremovesthepollinterval:

no ip ospf poll-interval

Mode

Interfaceconfiguration:XSR(config-if<xx>)#

Example

Thisexampleconfiguresthepollintervalto12timesthedefaulthellointerval(10seconds):

XSR(config-if<S1/0:0>)#ip ospf poll-interval 120

ip ospf priority

ThiscommandsetstheOSPFpriorityvaluefor routerinterfaces.Thepriorityvalueis

communicatedbetweenroutersbymeansofhellomessagesandthisvalueinfluencestheelection

ofadesignatedrouter.

Syntax

ip ospf priority number

Syntax of the “no” Form

Thenoformofthiscommandsetsthevaluetothedefault:

no ip ospf priority

interval

Pollperiod,rangingfrom1to65,535.

number

Specifiestherouterpriority,rangingfrom0to255.

previous next