Filter
Top Products
ISDN Debug and Show Commands
11-94 ISDN BRI and PRI Commands
Packet Processor Tx Scheduler Stats:
0 Packet driver Tx OK
0 Packet driver not Tx: MUX END_ERR_BLOCK
0 Packet driver not Tx: MUX ERROR
0 Packet driver not Tx: Unknown Msg from MUX
The unit number is 167772177.
The interrupt number is 27.
General: SCC 4 parm ram = 0xa0290f00, reg = 0xa0291660
TX RING ENTRIES:
The data ring starts at 0xa0290200.
TxDRNum = 16, pTxMblkDR = 0x010fc120, TxDRIdx = 0
TxDRCleanIdx = 0
(-2) CmdStsLen 0x00000000, pBuf 0x00000000
(-1) CmdStsLen 0x00000000, pBuf 0x00000000
( 0) CmdStsLen 0x00000000, pBuf 0x00000000
( 1) CmdStsLen 0x00000000, pBuf 0x00000000
( 2) CmdStsLen 0x00000000, pBuf 0x00000000
[...]
RX RING ENTRIES:
The data ring starts at 0xa02901c0.
RxDRNum = 8, pRxMblkDR = 0x00ffd200, RxDRIdx = 0
RxBuffSize = 1728, RxBuffOffset = 160
(-2) CmdStsLen 0x80000000, pBuf 0x21e146e0
(-1) CmdStsLen 0xa0000000, pBuf 0x21e14da0
( 0) CmdStsLen 0x80000000, pBuf 0x21e11e60
( 1) CmdStsLen 0x80000000, pBuf 0x21e12520
( 2) CmdStsLen 0x80000000, pBuf 0x21e12be0
[...]
show interface bri
ThiscommanddisplaysthestatusoftheBandD‐channelsʹserialdriver.Generallyspeaking,BRI
channelsaredisplayedexactlyasstandardserialportsandPRIchannelsaredisplayedas
standardT1/E1/ISDN‐PRIserial channels.
IftheB‐channelisnotconnectedbyanactivecall,theOPERstatewillbe
down.TheD‐channel
willdisplayL1andL2statusinadditiontostandardoutput.
TodisplaytheD‐orB‐channelsusethefollowingcommands:
•BRI‐
show interface bri 1/0orshow interface bri 1/0:0‐forDchannel
•PRI‐
show interface serial 2/1:23forT1Dchannel
•PRI‐
show interface serial 2/1:15forE1Dchannel
•PRI‐
show interface serial 2/1:0 - 22forT1Bchannels