Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

XSR CLI Reference Guide 13-83

13

Configuring ADSL

Observing Syntax and Conventions

TheCLIcommandsyntaxandconventionsusethenotationdescribedbelow.

ADSL Configuration Commands

ThefollowingcommandsetsdefineADSLfunctionalityontheXSRincluding:

• “CMVCommands”onpage 13‐83.

• “OtherADSLCommands”onpage 13‐87.

• “PPPConfigurationCommands”onpage 13‐99.

• “AT M ClearandShowCommands”onpage 13 ‐103.

CMV Commands

cmv append

ThiscommandaddsaCommandManagementVariable(CMV)totheDSPtraininglistwhichis

usedbytheDSPfirmwarewhenthelineisintrainingmode.Thiscommandisintendedforuseby

Enterasysfieldservicepersonnelonly.ThiscommandrequiresthattheADSLNIMbeinstalled

andtheDSP

firmwarefilebepresentintheFlash:directory.

Convention Description

xyz Key word or mandatory parameters (bold)

[x] [ ] Square brackets indicate an optional parameter (italic)

[x | y | z] [ | ] Square brackets with vertical bar indicate a choice of values

{x | y | z} { | } Braces with vertical bar indicate a choice of a required value

[x {y | z} ] [{ | } ] Combination of square brackets with braces and vertical bars indicates a

required choice of an optional parameter

(config-if<xx>) xx signifies interface type and number, e.g.: F1, S2/1.0, D1, M57, L1,

ATM0/1/1

Next Mode entries display the CLI prompt after a command is entered.

Sub-command headings are displayed in red, italicized text.

soho.enterasys.com Italicized, non-syntactic text indicates either a user-specified entry or text with

special emphasis

previous next