Filter
Top Products
File System Commands
XSR CLI Reference Guide 3-115
Examples
ThefollowingexampleimmediatelycoldrestartstheXSR:
XSR#reload cold
Thefollowingexamplewarmupgradesthenewimagefromthep rimaryOSfileintheflash:
directoryandtestsitfor15minutewiththefallbackoptionsettothesecondaryOSfileifasyntax
errorisfoundinthestartup‐configfile:
XSR#reload warm fallback flash:xsr1800.fls 15 config
ThefollowingexamplewarmrebootstheXSRin240hoursand12minutes:
XSR#reload in 240:12 cold
ThefollowingcommandupgradesthenewimageviaSNMPusingtheproprietaryMIBsenterasys‐
image‐validation‐mibandenterasys‐configuration‐management‐mib.Foradescriptionofthethree‐step
proceduretoconfiguretheMIBs,refertotheXSRUserGuide.
XSR#reload fallback cflash:xsr3004.fls 6 snmp 1.1.1.2
Thefollowingexampleupgradesthenewimagein12hours,12minuteswithafallbacktothe
secondaryOSifsyntaxerrorsaredetectedorifnoSNMPmessagesarereceivedfromSNMP
serverat192.168.57.4duringthetest:
XSR#reload at 12:12 fallback config 10 config snmp 192.168.57.4
Sample Output
Thefollowingoutputisdisplayed,promptingyouforaresponse,whenyouissueacoldreload:
XSR#reload cold
Proceed with reload (y/n)? y
X-Pedition Security Router Bootrom
Copyright 2004 Enterasys Networks Inc
....etc. proceeds with warm start
Thefollowingoutputisdisplayedwhenyoucancelareload:
XSR#reload cancel
No EOS Fallback is enabled
No reload is scheduled
rename
ThiscommandrenamesafileintheFlash: orCFlash:directory.
Syntax
rename {cflash: | flash:} source-filename destination-filename
Mode
PrivilegedEXEC:XSR#
cflash:
RenamesafilewithintheCFlash:directory.
flash:
RenamesafilewithintheFlash:directory
source-name
Sourcefilename.
destination-name
Destinationfilename.