Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

Hardware Controller Clear and Show Commands

XSR CLI Reference Guide 4-93

Mode

PrivilegedEXEC:XSR#

Example

ThefollowingexampleclearstheMIB‐IIcountersonGigabitEthernetport3,sub‐interface2:

XSR#clear counters gigabitethernet 3.2

clear interface fastethernet

ThiscommandresetsthehardwarelogicontheFastEthernetinterface.Usingitpreservesthe

currentloopbackmode,duplexmodeandspeed.ThiscommandisavailableontheXSR1800

Seriesroutersonly.

Syntax

clear interface fastethernet number

Mode

PrivilegedEXEC:XSR#

Example

XSR#clear interface fastethernet 2

clear interface gigabitethernet

ThiscommandresetsthehardwareontheGigabitEthernetinterface.Thiscommandisavailable

ontheXSR3000Seriesroutersonly.

Syntax

clear interface gigabitethernet number

Mode

PrivilegedEXEC:XSR#

Note: Issuing this command causes the interface to drop its link, any packets that it may have

received, and any packets that may be in the process of being transmitted, while it resets. It

preserves the current loopback mode, duplex mode and speed.

number

FastEthernetinterfacenumberrangingfrom1to2.

Note: Issuing this command causes the interface to drop its link, any packets that it may have

received, and any packets that may be in the process of being transmitted, while it resets. It

preserves the current loopback mode, duplex mode and speed.

number

GigabitEthernetport,rangingfrom1to3,andsub‐interface,rangingfrom1‐64.

previous next