General Network Management Commands
XSR CLI Reference Guide 1-9
Reply from 192.168.27.165: 10ms
Reply from 192.168.27.165: 10ms
Reply from 192.168.27.165: 10ms
Reply from 192.168.27.165: 10ms
Packets: Sent = 5, Received = 5, Lost = 0
Thefollowingexampleshowsthedestinationlostafterthreepings:
XSR>ping 134.141.235.165
Reply from 134.141.235.165: 20ms
Reply from 134.141.235.165: 10ms
Reply from 134.141.235.165: 10ms
Timeout
Timeout
Packets: Sent = 5, Received = 3, Lost = 2
privilege
ThiscommandmodifiestheusernameprivilegelevelassociatedwithaparticularCLI
configurationmode.Youcanalsoassociateaprivilegelevelwithanothercommandorgroupof
commands.Themodeswhichcanbesetincludethefollowing:
• class-map
• configure (global)
• controller
• exec
• interface-dialer
• interface-dlci
• interface-fastEthernet
• interface-loopback
• interface-serial
• map-class-dialer
• map-class-frame-relay
• policy-map
• policy-map-class
• router-ospf
• router-rip
• subinterface
Thiscommandisusedinconjunctionwiththeusernamecommandtosettheprivilegelevelfora
user.The
show running-configcommanddisplaysuserinformation.
Syntax
privilege operationMode {level value | reset} {command | commandgroup}
privilege
Associatesprivilegelevelwithacommand.
operationMode
Configurationmodeassociatedwithprivilegelevel.