Enterasys Networks XSR CLI Router User Manual


  Open as PDF
of 684
 
AAA Method Commands
XSR CLI Reference Guide 16-103
acct-port
ThiscommandspecifiestheUDPportforaccountingrequestsandusestheRADIUSmethodonly.
Syntax
acct-port port-number
Syntax of the “no” Form
Thenoformofthiscommandresetstothedefaultportnumber:
no acct-port
Default
Authorizationportnumber:1646.
Mode
AAAMethodconfiguration:XSR(aaa-method-radius)#
Example
ThisexampleusesRADIUSSBRtoresettheUDPaccountingportto6000:
XSR(config)#aaa method radius sbr default
XSR(aaa-method-radius)#auth-port 6000
address
ThiscommandspecifiestheaddressoftheRADIUSserverwitheitherahostnameorIPaddress.It
isusedforthe RADIUSmethodonly.
Syntax
address {host-name | ip-address} address
Syntax of the “no” Form
Thenoformofthiscommandcleartheaddressattribute:
no address {host-name | ip-address}
Note: If the port number is 0, the host will not be used for accounting.
port-number
Portnumberforaccountingrequests,rangingfrom0to10,000.
host-name
Specifiestheaddresswithahostname.
ip-address
SpecifiestheIPaddress.
address
Addressstring:eitherahostnameorIPaddressdependingonwhich
keywordisspecified.
 previous next