Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

T1/E1 & T3/E3 Commands

XSR CLI Reference Guide 2-65

Mode

Controllerconfiguration: XSR(config-controller xx)#

Default

•T3:44,210kbps(full‐rate)

•E3:34,099.5kbps(full‐rate)

Example

ThefollowingexampleconfigurestheT3controllerinslot1,card2withlinesourceclocking,M13

framing,inunchannelizedmode,withacablelengthof250,DSUinteroperabilitymodesettoa

KentroxDSU,andaDSUbandwidthof44,210kbps:

XSR(config)#controller t3 1/2/0

XSR(config-controller<T3-1/2/0>)#no channelized

XSR(config-controller<T3-1/2/0>)#clock source line

XSR(config-controller<T3-1/2/0>)#framing m13

XSR(config-controller<T3-1/2/0>)#cablelength 250

XSR(config-controller<T3-1/2/0>)#dsu mode 1

XSR(config-controller<T3-1/2/0>)#dsu bandwidth 44210

e-bit-reset

ThiscommandsetstheE‐bitintheE1frametozerowhiletheportisinanasynchronousstate.

Syntax

e-bit-reset

Syntax of the “no” Form

ThenoformofthiscommandnegatestheE‐‐bitreset:

no e-bit-reset

Mode

Controllerconfiguration:XSR(config-controller)#

Example

ThefollowingexampleresetstheE‐bitontheE1controller:

XSR(config-controller<E1-1/2/0>)#

previous next