Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

PPP Debug, Clear and Show Commands

XSR CLI Reference Guide 8-99

Syntax of the “no” Form

ThenoformofthiscommandremovesPPPdebuggingontheinterface:

no ppp debug packet

Default

Limit:100packets

Mode

Interfaceconfiguration:XSR(config-if<xx>)#

Example

ThisexamplesetsPPPdebuggingofIPCPandLQMpacketswitha50‐packetlimitonSerial1/0:

XSR(config)#interface serial 1/0

XSR(config-if<S1/0>)#encapsulation ppp

XSR(config-if<S1/0>)#ppp debug packet limit 50 ipcp lqm

Sample Output

ThefollowingdebuggingoutputisdisplayedonMultilinkinterface57:

XSR#show interface multilink 57

********** Multilink Interface Stats **********

Multilink 57 is Admin Up

Internet address is 192.168.34.1, subnet mask is 255.255.255.0

LCP State: OPENED

IPCP State: OPENED

Multilink State: OPENED

Detailed Debug PPP Control Packet is ON for [type1] [type2] [type3], limit is [x],

number decoded is [y]

clear ppp

ThiscommandclearsPPPcountersforinterfacesrunningPPP.

Syntax

clear ppp

Mode

PrivilegedEXEC:XSR#

Sample Output

Thefollowingoutputdisplayswhenyouentertheshow ppp interfacecommandafterclearing

theserial1/0:0port:

previous next