Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

Other IP Commands

XSR CLI Reference Guide 5-155

ip domain

ThiscommandidentifiesthedomaintowhichtheXSRbelongs.Ifthecommandisreissued,itis

consideredanupdateofthedomainnameandwilloverwritetheoldvaluewithanewvalue.

TheXSRusesthedomainnametohelpcreateacertificatesubjectname,whichisautomaticall y

formated

to:<hostname>.<domainname>.Youcanconfigurethehostnamewiththehostname

command.Ifthehostnameisnotsetwhenyouissuethe

ip domain command,theXSRwilluse

thehardcodedDefaultName.

Syntax

ip domain name {domain-name}

Syntax of the “no” Form

ThenoformofthiscommandresetstheIPdomainnametonovalue:

no ip domain name {domain-name}

Mode

Globalconfiguration: XSR(config>#

Example

Inthefollowingexample,thedomainnameenterasys.comisused:

XSR(config>#ip domain enterasys.com

ip equal-cost multi-path

Thiscommandenablesequal‐costmulti‐pathrouting andsetsthemethodforpathselection.

Syntax

:forenablingandsetting:theselectionmethod:

ip equal-cost multi-path {round-robin | per-flow}

Note: For Verisign CA interoperability, you must enter the domain name that you specified when

registering with Verisign.

domain-name

NameoftheIPdomaintowhichtheXSRbelongs.Upto128printable

charactersarepermittedwithnospaces.

previous next