Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

snmp-server Commands

1-22 Network Management

snmp-server host

ThiscommandspecifieshostparametersoftheSNMPserver;itaddsanewmanagementstation

tosendtrapsto.Iftheaddressalreadyexists,thecommandwillupdatetheserver’sconfiguration

whichisstoredinthesnmpTargetMIBdefinedbyRFC‐2573.

Syntax

snmp-server host ip-addr {traps | informs version {2c | 3 [{auth | noauth | priv}]]

community-stringOrUser [udp-port port][notification-type]

Syntax of the “no” Form

Thenoformremovesthe sp ecifiedhostfromthelistofhoststhattheXSRsenttrapsto:

no snmp-server host host ip-addr

Mode

Globalconfiguration:XSR(config)#

Defaults

•Trap‐type:SNMP,entity,frame‐relay

•UDPport:162

ip-addr

IPaddressofthetargetrecipient.

traps

SendsSNMPtrapstothishost.

informs

SendsInformnotifications.

version

Thesecuritymodelused.

2c

Version2csecuritymodelused.Thisallowsthetransmissionofinforms

andcounter64values.

3

Version3securitymodel(USM)used.

auth

Authenticationwithoutencryption.

noauth

Noauthenticationorencryption.

priv

Authenticationwithencryption.

community-

stringOrUser

Password‐likecommunitystringtobeusedwithforversions 1and2c.

Usernamewhenusingversion3securitymodel.

udp-port

SpecifiestheUDPportofthehosttouse.

port

TheUDPportnumberofthehost.

notification-

type

ThetypeoftraptobesentincludingBGP,entity,frame‐relay,ospf,and

snmptraps.

Note: You can configure up to 20 hosts.

previous next