Hardware Controller Clear and Show Commands
4-94 Configuring Hardware Controllers
Example
ThefollowingexampleresetsGigabitEthernetport1,sub‐interface5:
XSR#clear counters gigabitethernet 1.5
clear counters serial
Thiscommandclearsserialinterfacecounters.Thecountersclearedare:
•ifInOctets
•ifInUcastPkts
• ifInNUcastPkts
•ifInDiscards
• ifInErrors
• ifOutOctets
• ifOutUcastPkts
•ifOutNUcastPkts
•ifOutDiscards
• ifOutErrors
• ifInUnknownProtos
Syntax
clear counters serial [card / port]
Mode
PrivilegedEXEC:XSR#
Example
XSR#clear counters serial 1/0
clear interface serial
Thiscommandresetsthehardwarelogiconaserialinterface.
card
XSRcardnumber.
port
XSRportnumber.
Note: Issuing this command will cause the interface to drop its link, any packets that it may have
received, and any packets that may be in the process of being transmitted, while it resets.