Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

Dialer Interface Commands

XSR CLI Reference Guide 10-89

XSR(config-if<D3>)#dialer-group 7

XSR(config-if<D3>)#access-list 101 permit ip 0.0.0.0 255.255.255.255 255.255.255.255

0.0.0.0

XSR(config)#dialer-list 7 protocol ip list 101

map-class dialer

Thiscommanddefinesthedialstringʹscharacteristicsandassociatesthemwithauniqueclass

name.Oncethe

map-class dialer classnamecommandisexecutedtheparametersassignedto

thatclassnamemustbeconfigured.Theclassnameassignedmustmatchtheclassnameassignedto

thedialerstringclass classnamesotheycanbelinked.

Syntax

map-class dialer classname

Default

None‐noclassname

Mode

Globalconfiguration:XSR(config)#

Next Mode

Map‐ClassDialerconfiguration:XSR(config-map-class<xx>)#

Example

Theexamplebelowspecifiesa90‐secondwaittimeforthecarriersignalofthedialermapclass

TESTonDialerport0:

XSR(config)#interface dialer 0

XSR(config-if<D0>)#ip address 196.16.25.1 255.255.255.0

XSR(config-if<D0>)#encapsulation ppp

XSR(config-if<D0>)#dialer remote-name sitea

XSR(config-if<D0>)#dialer string 4165555584 class TEST

XSR(config-if<D0>)#dialer pool 1

XSR(config-if<D0>)#no shutdown

XSR(config)#map-class dialer 57

XSR(config-map-class<57>)#dialer wait-for-carrier-time 90

modem-init-string

ThiscommandsetsanATcommandstringusedtoinitializeamodem.

Syntax

modem-init-string word

classname Unique class identifier.

word Text to initialize the modem.

previous next