Filter
Top Products
Firewall Show Commands
XSR CLI Reference Guide 16-135
Mode
EXEC or Privileged EXEC Mode: XSR> or XSR#
Sample Output
Thefollowingoutputdisplays
Filter Source Destination Protocol ICMP Bi/Log
Name Network Network Name/Number Type
noICMP dmz private ICMP N/A Y/N
show ip firewall network
Thisstaticcountershowsallnetworkobjectsconfigured.Ifanetworkobjectnameisspecified
thenonlythatobjectisdisplayed.
Syntax
show ip firewall network [name]
Mode
EXEC or Privileged EXEC Mode: XSR> or XSR#
Sample Output
ThisoutputdisplaysanetworkobjectfortheEngineeringfirewallinthe192.168.100.0/24 range:
Name Start Address End Address Internal/External
Engineering 192.168.100.1 192.168.100.254 internal
show ip firewall network-group
Thisstaticcountershowsallnetworkgroupobjects.Ifanetworkgroupobjectisalsospecified
thenonlythatnetworkgroupisdisplayed.
Syntax
show ip firewall network-group [name]
Mode
EXEC or Privileged EXEC Mode: XSR> or XSR#
Note: Although ANY_INTERNAL and ANY_EXTERNAL objects do not display when this command is
entered, entering show ip firewall ANY_INTERNAL or ANY_EXTERNAL will display the
members of these intrinsic groups.