Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

AAA Usergroup Commands

XSR CLI Reference Guide 16-95

Example

Thefollowingexampleaddstheusergroupheadquarters:

XSR(config)#aaa group headquarters

XSR(aaa-group)#

dns server

ThiscommandsetstheaddressofDNSservers.Theseaddressesaregiventoconnectingclients

duringconnectiontime.

Syntax

dns server [primary | secondary] ip-address

Syntax of the “no” Form

Thenoformofthiscommandremovestheconfiguredserver:

no dns server [primary | secondary] ip-address

Mode

Usergroupconfiguration:XSR(aaa-group)#

Example

ThefollowingexamplesetstheprimaryDNSserverIPaddress:

XSR(config)#aaa group headquarters

XSR(aaa-group)#dns server primary 192.168.57.9

ip pool

ThiscommandlinksagloballydefinedpoolofIPaddressestothegroupofusers.IPpoolis

definedgloballybyusingthe

ip local pool command.IfanIPpoolisnotlinkedtothegroup

ofusers,eachusermusthaveanIPaddressconfiguredortheconnectionwillfail.

Syntax

ip pool pool-name

primary

SpecifiesprimaryDNSserver.

secondary

SpecifiessecondaryDNSserver.

ip-address

SpecifiesIPaddressoftheDNSserver.

Note: If an aaa user is configured to use a static IP address which belongs to a local IP pool, you

must exclude that address from the local pool.

pool-name

Nameofthepooltobelinkedtothegroupofusers.Thepool‐nameis

definedbythe

ip local pool command.

previous next