Filter
Top Products
Hardware Controller Clear and Show Commands
4-100 Configuring Hardware Controllers
show interface dialer
ThiscommanddisplaysinformationabouttheDialerinterface.
Syntax
show interface dialer [number]
Mode
PrivilegedEXECorGlobalconfiguration:XSR# orXSR(config)#
Sample Output
ThefollowingexampledisplaysinformationaboutDialerinterface3:
XSR#show interface dialer 3
********** Dialer Interface Stats **********
Dialer3 is Admin Down
Internet address is not assigned
Dialer3
Dialer state is: DOWN
Wait for carrier default: 60, default retry: 3
Dial String Success Failures Map Class
Free pool ISDN channels: <0>
Free pool serial ports: <0>
show interface fastethernet
ThiscommanddisplaysinformationaboutaFastEthernetinterface.Thisinterfaceisavailableon
theXSR1800Seriesroutersonly.
Syntax
show interface fastethernet [number]
Mode
PrivilegedEXECorGlobalconfiguration:XSR# orXSR(config)#
Sample Output
ThefollowingissampleoutputfromFastEthernetinterface1:
XSR#show interface FastEthernet 1
FastEthernet1 is Admin Up
Internet address is 51.51.51.1, subnet mask is 255.255.255.0
Internet address is 52.52.52.1, subnet mask is 255.255.255.0 Secondary
Internet address is 53.53.53.1, subnet mask is 255.255.255.0 Secondary
number
Dialerinterfacenumber,rangingfrom0to255.
number
FastEthernetinterfacenumberof1or2.