Support User Manuals

Enterasys Networks XSR CLI Router User Manual

Open as PDF

of 684

Virtual Router Redundancy Protocol Commands

XSR CLI Reference Guide 5-195

Mode

Interfaceconfiguration:XSR(config-if<xx>)#

Examples

Thefollowingexampleenablespreemptforvirtualroutergroup1witha2‐seconddelaysetonF1:

XSR(config)#interface fastethernet 1

XSR(config-if<F1>)#vrrp 1 preempt delay 2 or vrrp preempt delay 2

ThefollowingexampledisablesthepreemptforVRgroup1onF1:

XSR(config-if<F1>)#no vrrp 1 preempt or no vrrp preempt

vrrp <group> priority

Thiscommandsetsthepriorityleveloftherouterwithinavirtualgroup.Useittocontrolwhich

routerbecomesthemasterVR.

Syntax

vrrp group priority level

Syntax of the “no” Form

Thenoformofthiscommandrestoresthedefaultvalue:

no vrrp group priority

Defaults

•Level:ThepriorityoftheIPaddressowneris255,otherwisethedefaultis100.

•Group:1,rangingfrom1to255

Mode

Interfaceconfiguration:XSR(config-if<xx>)#

Examples

Thisexamplesetspriority150forVRgroup1onF1:

XSR(config)#interface fastethernet 1

XSR(config-if<F1>)#vrrp 1 priority 150 or vrrp priority 150

ThefollowingexamplesetsprioritytodefaultforVRgroup1onF1:

XSR(config-if<F1>)#no vrrp 1 priority or no vrrp priority

group

VRgroupnumber.

level

PriorityoftherouterwithintheVRRPgroup.Range:1to254.

previous next